• In this kit the amount of rubber is precisely measured to be mixed with the binder. 
• All that is required is to mix the numbered corresponding pots of glue and bags of rubber together. 
• You will need a bucket and mixer. 
• No scales are needed.

Mat (6mm)

Consistes of thoroughly mixing the rubber granules with the binder before applying them to the surface.  (Tools needed: large mixing bucket, mixer, trowels, tape and gloves)

Often used in playgrounds and sport grounds, the finished surface is much thicker than the "skin" method and gives increased shock absorbent caracteristics. Due to the rubber granules being coated in binder, the colours of the granules become much more vibrant too and due to the thickness of the finished surface, this method is the most hard wearing of the two.